Ryan Ryan

72 Articles

Cortex-M0 DesignStart Clock Duty Cycle Requirements

The Cortex-M0 DesignStart microcontroller from ARM utilizes an ARM Cortex-M0 processor core which requires a clock source with specific duty

Ryan Ryan 9 Min Read

Debugging Cortex-M0 DesignStart on non-ARM FPGAs

Using the Cortex-M0 DesignStart IP core on non-ARM partner FPGAs can provide a low-cost way to prototype and evaluate ARM's

Ryan Ryan 10 Min Read

Using Xilinx vs Altera FPGAs for Cortex-M0 DesignStart

When looking to implement an ARM Cortex-M0 design on an FPGA, the two major FPGA vendors to consider are Xilinx

Ryan Ryan 8 Min Read

Implementing Cortex-M0 DesignStart on an Altera FPGA

Implementing an ARM Cortex-M0 processor on an FPGA can be an excellent way to prototype and test an embedded system

Ryan Ryan 8 Min Read

Forcing GCC to generate only Thumb-16 instructions for Cortex-M

The Cortex-M processors from ARM only support the Thumb-16 instruction set. By default, the GCC compiler will generate a mix

Ryan Ryan 6 Min Read

Cortex-M0 hangs after performing soft reset

A soft reset is a common troubleshooting technique used with Cortex-M0 microcontrollers to clear errors and reset the device to

Ryan Ryan 6 Min Read

What are SP (stack) and LR in ARM?

The stack pointer (SP) and link register (LR) are important registers used for function calls and returns in ARM processors.

Ryan Ryan 8 Min Read

What is the bootloader and startup code in embedded systems?

Embedded systems rely on a bootloader and startup code to initialize the hardware and software components and get the system

Ryan Ryan 10 Min Read

What is the difference between bootloader, startup code and bootstrap loader?

When an ARM-based system powers on, there are several key software components that run to initialize the hardware and prepare

Ryan Ryan 7 Min Read

What is the reset sequence in ARM Cortex-M0?

The reset sequence in ARM Cortex-M0 microcontrollers involves several steps that initialize the processor and peripherals to a known state.

Ryan Ryan 8 Min Read

What is the reset vector address of ARM Cortex-M0?

The reset vector address of ARM Cortex-M0 is 0x00000000. This is the memory address that the processor will start executing

Ryan Ryan 6 Min Read

Can QEMU run on arm?

The short answer is yes, QEMU can run on ARM processors. QEMU is an open source machine emulator and virtualizer

Ryan Ryan 9 Min Read
- Sponsored-
Ad image